Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2013 >> ATS 2.5L Eng VIN A, Gas >> Repair and Diagnosis >> External Pages >> Different car >> Section 205 (Programming And Setup - All Systems) >> Repair Instructions >> Front View Camera Module Programming and Setup >> Unsuccessful Programming Recovery

Unsuccessful Programming Recovery

WARNING: This page is about a different car, the 2014 Chevrolet SS. However, it is still accessible from the selected car via links, so may be relevant.

In the event of an interrupted or unsuccessful programming event, perform the following steps:

  1. Ignition ON. Ensure the control module, DLC and programming tool connections are secure and the SPS software is up to date.
  2. Verify the front view control module can be reprogrammed.
    • If the front view control module cannot be reprogrammed 
    1. Ignition OFF for one minute, ignition ON.
    2. Verify the front view control module can be reprogrammed.
      • If the front view control module cannot be reprogrammed, replace the control module.
      • If the front view control module can be reprogrammed.
    3. All OK.
    • If the front view control module can be reprogrammed 
  3. All OK.
scientia non olet · About Mike's Workshop Manuals