Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2012 >> SRX AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls/Fuel - 3.6L - Repair Instructions >> Repair Instructions >> Evaporative Emission Front Pipe Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Identifying Evaporative Emission Line
    GM2234692Courtesy of GENERAL MOTORS COMPANY
  1. Disconnect the evaporative emission line (1). Refer to Plastic Collar Quick Connect Fitting Service .
    2. Fig 2: Identifying Evaporative Emission Line & Plastic Retainer
    GM2234694Courtesy of GENERAL MOTORS COMPANY
  2. Disengage the evaporative emission line (1) from the plastic retainer (2).
    3. Fig 3: View Of Evaporative Emission Line
    GM2234695Courtesy of GENERAL MOTORS COMPANY
  3. Disconnect the evaporative emission line (1). Refer to Plastic Collar Quick Connect Fitting Service .
  4. Disengage the evaporative emission line (1) from the plastic retainers (2) and remove the evaporative emission line.
scientia non olet · About Mike's Workshop Manuals