Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2012 >> Escalade EXT >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat Heating System And Seat Cooling System >> Repair Instructions >> Front Seat Heater Control Module Replacement (with HP2)

Front Seat Heater Control Module Replacement (with HP2)

Fig 1: Front Seat Heater Control Module
GM2365778Courtesy of GENERAL MOTORS COMPANY
Front Seat Heater Control Module Replacement (with HP2)

Callout Component Name
Preliminary Procedure 
Remove the driver or passenger seat back cushion cover and pad. Refer to Front Seat Replacement - Bucket (without HP2) , Front Seat Replacement - Bucket (with HP2) .
1 Front Seat Heater Control Module Rivet (Qty: 2)
WARNING:

Approved safety glasses and gloves should be worn when performing this procedure to reduce the chance of personal injury.

Procedure

  1. Drill out the old rivets.
  2. Use new rivets for replacements.
2 Front Seat Heater Control Module

Procedure

  1. Disengage the electrical connector.
  2. Disconnect the module from the bracket.
  3. Refer to Control Module References for replacement and setup information.
scientia non olet · About Mike's Workshop Manuals