Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2012 >> Escalade EXT >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Power Door Lock System And Release Systems >> Diagnostic Information and Procedures >> DTC B2495 >> Component Testing

Component Testing

  1. Install a 20A fused jumper wire between the control terminal 1 and 12 V. Momentarily install a jumper wire between the control terminal 3 and ground. The liftgate latch assembly should perform the CINCH or RELEASE function.
    • If the function does not perform as specified, replace the liftgate latch assembly.
  2. Reverse the jumper wires; the liftgate latch assembly should perform the RELEASE or CINCH function.
    • If the function does not perform as specified, replace the liftgate latch assembly.
scientia non olet · About Mike's Workshop Manuals