Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2012 >> CTS Base, 2D Coupe, AWD >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> HVAC System - Automatic >> Repair Instructions >> Blower Motor Control Module Replacement

Blower Motor Control Module Replacement

Fig 1: View Of Blower Motor Control Processor & Screws (LHD)
GM1788800Courtesy of GENERAL MOTORS COMPANY
Blower Motor Control Module Replacement

Callout Component Name

Preliminary Procedures

  1. Remove the right sound insulator. Refer to Instrument Panel Insulator Replacement - Right Side (Right Hand Drive) , Instrument Panel Insulator Replacement - Right Side (Left Hand Drive) .
  2. Remove the I/P Compartment. Refer to Instrument Panel Compartment Replacement (Right Hand Drive) , Instrument Panel Compartment Replacement (Left Hand Drive) .
  3. Remove the electrical connectors from the blower motor control processor.
1 Blower Motor Control Processor Screw (Qty: 2)
CAUTION:

Refer to Fastener Caution .


Tighten 
9 N.m (80 lb in)
2 Blower Motor Control Processor
scientia non olet · About Mike's Workshop Manuals