Ignition Lock Key Transmitter Antenna Replacement - Floor Console (Active)

Fig 1: Ignition Lock Key Transmitter Antenna - Floor Console (Active)

Courtesy of GENERAL MOTORS COMPANY

Callout	Component Name
Preliminary Procedure Remove the front floor console compartment. Refer to Front Floor Console Compartment Replacement .
1	Ignition Lock Key Transmitter Antenna Nut (Qty: 3) Procedure Tighten until fully seated but do not strip.
2	Ignition Lock Key Transmitter Antenna Procedure Disconnect the electrical connectors. For programming and set up information, refer to Control Module References .

Callout

Component Name

Preliminary Procedure
Remove the front floor console compartment. Refer to Front Floor Console Compartment Replacement .

Ignition Lock Key Transmitter Antenna Nut (Qty: 3)
Procedure
Tighten until fully seated but do not strip.

Ignition Lock Key Transmitter Antenna

Procedure