Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2011 >> SRX 2.8 6 >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 2.8L Or 3.0L - Repair Instructions >> Repair Instructions >> Primary Fuel Tank Module Replacement (China) >> Removal Procedure

Removal Procedure

    WARNING: Refer to Gasoline/Gasoline Vapors Warning .
  1. Remove the fuel tank. Refer to Fuel Tank Replacement .
    2. Fig 1: Evaporative Emission Lines & Electrical Connectors
    GM2232877Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the electrical connectors (1) from the primary and secondary fuel tank modules.
  3. Disconnect the fuel and evaporative emission lines (2). Refer to Plastic Collar Quick Connect Fitting Service .
  4. Remove the secondary fuel pump module. Refer to Secondary Fuel Tank Module Replacement .
    5. Fig 2: Fuel Tank Sender Wrench & Cam Lock Ring
    GM2232646Courtesy of GENERAL MOTORS CORP.
  5. Using the CH 48482:  wrench, remove the cam lock ring (1) by turning counterclockwise.
    6. Fig 3: View Of Primary Fuel Tank Module & O-Ring
    GM2232814Courtesy of GENERAL MOTORS CORP.
  6. Remove the primary fuel tank module (1) and the O-ring (2).
  7. If replacing the fuel pump module only, remove the primary fuel level sensor. Refer to Primary Fuel Level Sensor Replacement .
scientia non olet · About Mike's Workshop Manuals