Navigation Information Display Bezel Replacement

Fig 1: Identifying Navigation Information Display Bezel & Screws

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure:  Remove the radio control assembly. Refer to Radio Control Assembly Replacement .
1	Navigation Information Display Bezel Screws (Qty: 2) Tighten:  2.5 N.m (22 lb in)
2	Navigation Information Display Bezel Procedure:  Slide a flat-bladed plastic trim tool between the information display screen and the navigation information display bezel along each side and release the bezel from the assembly.