Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2011 >> Escalade EXT >> Repair and Diagnosis >> Steering >> Steering Linkage System >> Repair Instructions >> Steering Linkage Inner Tie Rod Replacement >> Removal Procedure

Removal Procedure

  1. Remove the engine shield, if equipped. Refer to Engine Shield Replacement .
  2. Remove the steering linkage outer tie rod. Refer to Steering Linkage Outer Tie Rod Replacement .
    3. Fig 1: Inner Tie Rods Ends
    GM865341Courtesy of GENERAL MOTORS CORP.
  3. Remove the steering linkage inner tie rod (1) from the relay rod using wrench J 34028  (2).
scientia non olet · About Mike's Workshop Manuals