Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2011 >> Escalade EXT >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Lighting System >> Repair Instructions >> Brake Pedal Position Sensor Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Brake Pedal Position Sensor, Electrical Connector And Bolts
    GM1687770Courtesy of GENERAL MOTORS CORP.
  1. Install the brake pedal position sensor (3) to the vehicle.
    2. CAUTION:

    Refer to Fastener Caution .

  2. Install the brake pedal position sensor bolts (2) and tighten to 9 N.m (80 lb in).
  3. Connect the brake pedal position sensor electrical connector (1).
  4. Install the fuse block cover.
  5. Install the driver knee bolster. Refer to Knee Bolster Replacement (Except Cadillac) , Knee Bolster Replacement (Cadillac) .
scientia non olet · About Mike's Workshop Manuals