Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2010 >> STS 3.6 V, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 3.6L - Repair Instructions >> Repair Instructions >> Intake Manifold Runner Control Solenoid Replacement (LP1, LY7) >> Installation Procedure

Installation Procedure

    Fig 1: Intake Manifold Runner Control Solenoid & Bolts
    GM1285195Courtesy of GENERAL MOTORS CORP.
  1. Install the intake manifold runner control solenoid.
    2. CAUTION: Refer to Fastener Caution .
  2. Install the intake manifold runner control solenoid bolts and tighten to 10 N.m (89 lb in).
  3. Install the upper intake manifold. Refer to Lower Intake Manifold Replacement (LP1, LY7) .
scientia non olet · About Mike's Workshop Manuals