Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2010 >> STS 3.6 V, AWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 3.6L - Repair Instructions >> Repair Instructions >> Ignition Coil Replacement - Bank 2 >> Installation Procedure

Installation Procedure

    Fig 1: Ignition Coils & Bolts
    GM860797Courtesy of GENERAL MOTORS CORP.
  1. Install the ignition coil(s).
    2. CAUTION: Refer to Fastener Caution .
  2. Install the ignition coil bolt(s) and tighten to 10 N.m (89 lb in).
    3. Fig 2: Ignition Coil Electrical Connectors
    GM887888Courtesy of GENERAL MOTORS CORP.
  3. Install the ignition coil electrical connector(s).
  4. If necessary, install the upper intake manifold. Refer to Upper Intake Manifold Replacement (LP1, LY7) .
scientia non olet · About Mike's Workshop Manuals