Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2010 >> DTS 4.6 9 >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System & Fuel System - 4.6L - DTC P0016 To P0341 >> DTC P0016 >> Circuit/System Testing

Circuit/System Testing

  1. Idle the engine at normal operating temperature. Observe the DTC information with a scan tool. DTC P0016 should not set.
    • If a DTC sets, inspect for the following and repair as necessary:
      • The correct installation of the camshaft sensor
      • The correct installation of the crankshaft sensor
      • A timing chain tensioner condition
      • An incorrectly installed timing chain
      • Excessive play in the timing chain or sprockets
      • A timing chain that jumped teeth
  2. Operate the vehicle within the Conditions for Running the DTC to verify the DTC does not reset. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.