Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2010 >> DTS 4.6 9 >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System & Fuel System - 4.6L - Repair Instructions - >> Repair Instructions >> Fuel Tank Filler Hose Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Fuel Filler Hose
    GM1671974Courtesy of GENERAL MOTORS CORP.
  1. Install the fuel fill hose to the fuel tank. Ensure that the notch (3) in the fill hose is aligned with the notch on the fuel tank.
    2. CAUTION: Refer to Fastener Caution .
  2. Tighten the fuel fill hose clamp (1) at the fuel tank.

    Tighten:  Tighten the fuel filler hose clamp to 4 N.m (35 lb in).

  3. Install the fuel tank. Refer to Fuel Tank Replacement .
scientia non olet · About Mike's Workshop Manuals