Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2010 >> DTS 4.6 9 >> Repair and Diagnosis >> Engine Mechanical >> Engine Control System & Fuel System - 4.6L - Repair Instructions - >> Repair Instructions >> Accelerator Pedal Position Sensor Replacement >> Installation Procedure

Installation Procedure

    Fig 1: Identifying Accelerator Pedal Nuts
    GM1671028Courtesy of GENERAL MOTORS CORP.
  1. Install the accelerator pedal.
    2. CAUTION: Refer to Fastener Caution .
  2. Install the accelerated pedal nuts.

    Tighten:  Tighten the nuts to 10 N.m (89 lb in).

    3. Fig 2: Identifying Accelerator Pedal Position (APP) Sensor
    GM1671027Courtesy of GENERAL MOTORS CORP.
  3. Connect the body harness electrical connector (1) to the APP sensor.
  4. Install the left I/P sound insulator. Refer to Instrument Panel Insulator Panel Replacement - Left Side .
scientia non olet · About Mike's Workshop Manuals