Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2010 >> CTS V, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 6.2L - Repair Instructions >> Repair Instructions >> Evaporative Emission System Hose/Pipe Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of EVAP Hose Retainers
    GM818893Courtesy of GENERAL MOTORS CORP.
  1. Position the EVAP hose to the fuel tank.
  2. Install the chassis to canister EVAP hose to the following:
    • The body retainer (1)
    • The 3 retaining features (2) on the fuel tank
    • The retainer clip (3)
  3. Install the fuel tank. Refer to Fuel Tank Replacement .
scientia non olet · About Mike's Workshop Manuals