Driver or Passenger Seat Adjuster Memory Module Replacement

Fig 1: Front Seat Adjuster Memory Module

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the front seat. Refer to Front Seat Replacement - Bucket (AQ9) or Front Seat Replacement - Bucket (W2E) .
1	Front Seat Adjuster Memory Module Procedure Disconnect the electrical connector. Unclip the module from the bracket and slide out through the bottom of the seat. Refer to Control Module References for programing and setup information.

Callout

Component Name

Front Seat Adjuster Memory Module

Procedure

Disconnect the electrical connector.
Unclip the module from the bracket and slide out through the bottom of the seat.
Refer to Control Module References for programing and setup information.