Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2009 >> XLR Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 157 (Tire Pressure Monitoring System) >> Repair Instructions >> Tire Pressure Monitor Procedure >> Using the Scan Tool

Using the Scan Tool

WARNING: This page is about a different car, the 2008 Cadillac XLR. However, it is still accessible from the selected car via links, so may be relevant.
  1. Adjust all tire pressures to the recommended kPa/psi. Refer to Vehicle Certification, Tire Placard, Anti-Theft, and Service Parts ID Label .
  2. Install a scan tool.
  3. With the ignition switch, select ON, with the engine OFF.
  4. With the scan tool, select Special Functions.
  5. Select Tire Pressure Reset.
  6. Press the Reset soft key and TIRE PRESSURE NORMAL is displayed on the DIC.
  7. Use the scan tool in order to clear the TPM DTC.
scientia non olet · About Mike's Workshop Manuals