Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2009 >> XLR Base >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Diagnostic Information and Procedures >> DTC C0914 >> Circuit/System Verification

Circuit/System Verification

  1. Engine running, measure and record the voltage at the battery terminals.
  2. Verify that the battery voltage is 12.6-15.5 volts.
  3. Engine running, observe the scan tool battery voltage signal parameter. The reading should be between 12.6 and 15.5 volts.
scientia non olet · About Mike's Workshop Manuals