Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2009 >> XLR Base >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Diagnostic Information and Procedures >> DTC C0895 >> Circuit/System Verification

Circuit/System Verification

  1. Verify DTC C0895 is set as current.
  2. Engine running, measure and record the voltage at the battery terminals.
  3. Verify that the battery voltage is 12.6-15.5 volts.
  4. Engine running, observe the ESC scan tool ignition voltage signal parameter.
  5. Verify that the scan tool displays a value that is within 2 volts of the battery terminal voltage.
scientia non olet · About Mike's Workshop Manuals