Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2009 >> SRX 4.6 A, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System & Fuel System - 4.6L - DTC P0335 To DTC P2544 >> DTC P0335 >> Component Testing

Component Testing

IMPORTANT: You must perform the Circuit/System Testing before proceeding with Component Testing.
  1. Inspect the CKP sensor for correct installation. Remove the CKP sensor from the engine and inspect the sensor and the O-ring for damage.
    • If the sensor is loose, incorrectly installed, or damaged; repair or replace the CKP sensor.
  2. Connect the CKP Sensor connector to the CKP sensor. Turn ON the ignition, with the engine OFF.
  3. Ignition ON and engine OFF. Observe the CKP Active Counter while passing a steel object across the tip of the sensor repeatedly. The CKP Active Counter parameter should increment.
    • If the parameter does not increment, replace the CKP sensor.