Installation Procedure

WARNING: This page is about a different variant/trim than selected.

Fig 1: View Of Spark Plug & Spark Plug Seat

Courtesy of GENERAL MOTORS CORP.

Inspect each spark plug gap and adjust as needed. Refer to Ignition System Specifications .
Hand start the spark plugs in the corresponding cylinders.

CAUTION: Refer to Fastener Caution .

Tighten the spark plugs.
- For cylinder head-new: Tighten the spark plugs to 20 N.m (15 lb ft).
- For cylinder head-all subsequent installations: Tighten the spark plugs to 15 N.m (11 lb ft).
Install the spark plug wires. Refer to Spark Plug Wire Replacement .
Install the Intake manifold front cover. Refer to Intake Manifold Cover Replacement - Front .