C056D 34

Program the EBCM. If DTC C056D 34 sets after programming, perform the following steps:

• If DTC C056D 35 is set, turn off the ignition, wait 30 seconds, turn ignition on, if DTC C056D 35 failed this ignition cycle, replace the EBCM.
• If DTC C056D 34 is set, turn off the ignition, wait 30 seconds, turn ignition on, if DTC C056D 34 failed this ignition cycle, program the EBCM.
  • If DTC C056D 34 sets after programming, replace the EBCM.