Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2008 >> SRX 4.6 A, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System & Fuel System - 4.6L (LH2) - Introduction >> Repair Instructions >> Accelerator Pedal Position Sensor Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Identifying Accelerator Pedal
    GM910941Courtesy of GENERAL MOTORS CORP.
  1. Remove the left instrument panel (I/P) sound insulator. Refer to Instrument Panel Insulator Panel Replacement - Left Side (Left Hand Drive) or Instrument Panel Insulator Panel Replacement - Left Side (Right Hand Drive) .
  2. Disconnect the accelerator pedal position (APP) sensor electrical connector.
  3. Remove the accelerated pedal bolts (2).
  4. Remove the accelerator pedal (1) from the vehicle.
scientia non olet · About Mike's Workshop Manuals