Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2007 >> XLR V >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 4.4L - Introduction (2 Of 2) >> Repair Instructions >> Fuel Level Sensor Replacement - Left Side >> Removal Procedure

Removal Procedure

    Fig 1: View Of Fuel Pump Module
    GM1767507Courtesy of GENERAL MOTORS CORP.
  1. Remove the left fuel tank module (2). Refer to Fuel Tank Module Replacement - Left Side .
  2. Remove the fuel pump module O-ring (3) from the fuel tank opening.
  3. Fig 2: Identifying Fuel Level Sensor
    GM1767514Courtesy of GENERAL MOTORS CORP.
  4. Press down on the locking tab and remove the level sensor (1) from the module.
  5. Make a note of the wire location in relation to the internal connector.
  6. Remove the level sensor wires from the internal connector. Refer to Delphi Connectors (Micro .64) , Delphi Connectors (Micro-Pack 100W) , Delphi Connectors (Pull To Seat) , Delphi Connectors (Push To Seat) , Delphi Connectors (Weather Pack) or Delphi Connectors (12-Way) .