Fastener Tightening Specifications
WARNING: This page is about a different car, the 2008 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Air Inlet Grille Nut-Driver Side | 6 N.m | 53 lb in |
| Headlamp Washer Pump Screws to Lower Headlamp Assembly-Export | 6 N.m | 53 lb in |
| Rear Wiper Arm Nut | 17 N.m | 13 lb ft |
| Washer Solvent Container Fill Neck Bolt to Upper Tie Bar | 6 N.m | 53 lb in |
| Washer Solvent Container Horizontal Bracket to Engine Cradle Clinch Nut | 9 N.m | 80 lb in |
| Washer Solvent Container Horizontal Bracket to Washer Bottle Nut | 6 N.m | 53 lb in |
| Washer Solvent Container Nuts | 9 N.m | 80 lb in |
| Washer Solvent Container Screws | 9 N.m | 80 lb in |
| Wiper Arm Assembly Nuts | 32 N.m | 24 lb ft |
| Wiper Drive System Module Mounting Bolts | 10 N.m | 89 lb in |
| Wiper Motor Mounting Screws to Wiper Drive Module Mounting Bracket | 11 N.m | 97 lb in |