Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2007 >> XLR Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 7 (Wiper System & Washer System) >> Repair Instructions >> Washer Solvent Container Level Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Washer Solvent Level Sensor Switch
    GM1235990Courtesy of GENERAL MOTORS CORP.
  1. Remove the lower air deflector. Refer to Front Air Deflector Replacement .
  2. Disconnect the electrical connector from the washer solvent level sensor switch.
  3. Place a pan under the area where the level sensor will be removed in order to retain the lost solvent.
  4. Drain the washer solvent into a suitable container.
    5. Fig 2: View Of Washer Solvent Level Sensor Switch & Grommet
    GM786883Courtesy of GENERAL MOTORS CORP.
  5. Using 2 flat-bladed tools, pry outward the washer solvent container level sensor switch (1) from the washer solvent container.
  6. Remove the washer solvent level sensor switch from the container.
  7. Remove the washer solvent container level sensor grommet (3) from the washer solvent container and discard.
scientia non olet · About Mike's Workshop Manuals