Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2007 >> XLR Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (Power Seat System) >> Repair Instructions >> Power Seat Switch Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the wiring harness in the position in which it was removed.
  2. Connect the electrical connector to the power seat switch.
  3. Slide the power seat switch upward into the seat cushion frame.
  4. Install the push-in fastener in order to secure the power seat switch to the seat cushion frame.
  5. Install the seat cushion cover over the switch.
  6. Position the power seat switch bezel over the switches.
  7. Engage the power seat switch bezel fasteners in order to secure the bezel to the seat cushion frame.
    8. Fig 1: Installing Power Seat Switch Knobs
    GM815655Courtesy of GENERAL MOTORS CORP.
  8. Install the power seat switch knobs.
  9. Install the seat cushion. Refer to Front Seat Cushion Replacement .
  10. Enable the SIR system. Refer to SIR Disabling and Enabling .
scientia non olet · About Mike's Workshop Manuals