Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2007 >> XLR Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (Power Seat System) >> Repair Instructions >> Driver Seat Adjuster Memory Switch Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Switch Electrical Connectors
    GM754071Courtesy of GENERAL MOTORS CORP.
  1. Snap the switch into the door switch bezel.
  2. Connect the electrical connector.
    3. Fig 2: View Of Switch Plate
    GM754068Courtesy of GENERAL MOTORS CORP.
  3. Insert the rear of the switch assembly into the door trim panel.
  4. Press down on the front of the switch assembly to engage the switch to the door trim panel.
scientia non olet · About Mike's Workshop Manuals