Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2007 >> XLR Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Lighting Systems) >> Repair Instructions >> Backup Lamp Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2008 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Locating Back Up Lamp Sockets
    GM1257689Courtesy of GENERAL MOTORS CORP.
  1. Open the liftgate.
  2. Remove the liftgate applique. Refer to Liftgate Applique Replacement .
  3. Remove the back up lamp socket (1) from the liftgate applique by turning the socket (1) counterclockwise.
  4. Remove the back up lamp bulb from the socket.
scientia non olet · About Mike's Workshop Manuals