Scan Tool Data List
Scan Tool Data List
| Scan Tool Parameter | Data List | Units Displayed | Typical Data Value |
|---|---|---|---|
| BCM Data Operating Conditions: Ignition ON, Engine OFF |
|||
| Accy. Indicator Command | Data | On/Off | Off |
| Accy. Relay Command | Data | On/Off | On |
| Auxiliary Power | Data | On/Off | On |
| Battery Voltage Signal | Data | Volts | 12.5 |
| Brake Apply Sensor Reference Signal | Data | Volts | 5 |
| Current Power Mode | Data | OFF/ACC/RUN/CRANK | RUN |
| Idle Boost Level | Data | % | Varies |
| Ignition Cycle Counter | Data | Counts | Varies |
| Ignition Mode Switch | Data | Volts | 12.5 |
| Ign. Mode Sw. Dimming Command | Data | On/Off | On |
| Inadvertent Power Cmd. | Data | On/Off | Off |
| Inadvertent Power Signal | Data | Active/Inactive | Active |
| Key in Cylinder Switch | Data | Active/Inactive | Inactive |
| Off Indicator Command | Data | On/Off | Off |
| Run/Crank Relay Command | Data | On/Off | On |
| Start Indicator Command | Data | On/Off | On |
| RCDLR Data Operating Conditions: Ignition ON, Engine OFF |
|||
| Battery Voltage Signal | Data | Volts | 12.5 |
| Ignition Mode Switch | Data | Idle, ACC/OFF, Crank | Idle |
| Run/Crank Relay Command | Data | On/Off | Off |