Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2007 >> STS V >> Repair and Diagnosis >> Electrical >> Charging Systems >> Battery, Charging System And Starting System >> Repair Instructions >> Generator Bracket Replacement (LC3) >> Removal Procedure

Removal Procedure

    Fig 1: View Of Generator Bracket Bolts - LH2
    GM887717Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
  2. Remove the generator. Refer to Generator Replacement (LC3)  or Generator Replacement (LH2 w/AWD)  or Generator Replacement (LH2 w/RWD)  or Generator Replacement (LY7) .
  3. Remove the generator drive belt tensioner. Refer to Drive Belt Tensioner Replacement - Generator .
  4. Remove the right side engine mount bracket. Refer to Engine Mount Bracket Replacement - Right Side .
  5. Remove the generator bracket bolts (1, 2 and 3).
  6. Remove the generator bracket from the engine.
scientia non olet · About Mike's Workshop Manuals