Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2007 >> STS Base, 3.6 7, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Instrument Panel Trim And Console Trim) >> Repair Instructions >> Front Floor Console Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2010 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the upper console trim. Refer to Front Floor Upper Console Trim Plate Replacement .
  2. Remove the shiftier bezel. Refer to Console Shift Lever Bezel Replacement .
    3. Fig 1: Front Floor Console & Retaining Bolts
    GM1442967Courtesy of GENERAL MOTORS CORP.
  3. Move the driver and passenger front seat in order to access the retaining bolts.
  4. Reposition the carpet in order to access the retaining bolts.
  5. Remove the retaining bolts.
    6. Fig 2: Front Floor Console Electrical Connectors
    GM1442969Courtesy of GENERAL MOTORS CORP.
  6. Disconnect the console electrical connectors.
  7. Lift the console upward in order to release the retainers securing the rear of the console to the vehicle.
  8. Remove the console from the vehicle.
scientia non olet · About Mike's Workshop Manuals