Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2007 >> STS Base, 3.6 7, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Instrument Panel Trim And Console Trim) >> Repair Instructions >> Center Console End Panel Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2010 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Center Console End Panel
    GM1442978Courtesy of GENERAL MOTORS CORP.
  1. Release the retaining clips using a blunt trim tool.
  2. Disconnect the wire harness connectors.
  3. Remove the end panel trim panel.
  4. If replacing the trim panel, transfer all necessary components.
scientia non olet · About Mike's Workshop Manuals