Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2007 >> SRX 4.6 A, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System & Fuel System - 4.6L - Introduction (2 Of 2) >> Repair Instructions >> Primary Fuel Level Sensor Replacement >> Removal Procedure

Removal Procedure

  1. Remove the primary fuel tank module. Refer to Primary Fuel Tank Module Replacement .
  2. Disconnect the fuel level sensor electrical connector (1) from the module.
    Fig 1: View Of Primary Fuel Level Sensor Electrical Connector
    GM820628Courtesy of GENERAL MOTORS CORP.
  3. Complete the following in order to remove the fuel level sensor (1) from the module assembly:
    1. Pull the locking tab (2) away from the sensor (1).
    2. Slide the sensor (1) away from the module assembly.
    3. Fig 2: View Of Fuel Level Sensor & Locking Tab
      GM820629Courtesy of GENERAL MOTORS CORP.