Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2007 >> SRX 3.6 7, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Entertainment Systems >> Cellular System, Entertainment System, And Navigation System >> Repair Instructions >> Digital Radio Receiver Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Digital Radio Receiver Electrical Connectors
    GM1211148Courtesy of GENERAL MOTORS CORP.
  1. Connect the receiver electrical connectors.
  2. Fig 2: View Of Digital Radio Receiver
    GM1210910Courtesy of GENERAL MOTORS CORP.
  3. Locate the receiver to the vehicle.
  4. NOTE: Refer to Fastener Notice .
  5. Install the fasteners securing the receiver to the vehicle.

    Tighten:  Tighten the fasteners to 9 N.m (80 lb in).

  6. Install the right body side trim. Refer to Body Side Rear Trim Panel Replacement (w/o TB5) or Body Side Rear Trim Panel Replacement (w/TB5) .
  7. Perform the setup procedure for the digital radio receiver. Refer to Digital Radio Receiver Setup .