Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2007 >> SRX 3.6 7, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Collision/Avoidance >> Object Detection System >> Repair Instructions >> Information Center Telltale Assembly Replacement >> Removal Procedure

Removal Procedure

Fig 1: View Of Information Center Telltale Assembly
GM1233599Courtesy of GENERAL MOTORS CORP.
  1. Pull downward on the front of the rear park assist (RPA) bezel in order to release the retaining clips (3).
  2. Disconnect the electrical connector (2).
  3. Remove the RPA tell tale indicator from the bezel.
scientia non olet · About Mike's Workshop Manuals