Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2007 >> SRX 3.6 7, AWD >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Anti-Theft Systems >> Power Door Lock System And Release Systems >> Repair Instructions >> Accessory and Liftgate Control Module Replacement

Accessory and Liftgate Control Module Replacement

Fig 1: View Of Accessory and Liftgate Control Module
GM1889136Courtesy of GENERAL MOTORS CORP.
Accessory and Liftgate Control Module Replacement

Callout Component Name
Preliminary Procedure: 
Remove the body side trim panel. Refer to Body Side Rear Trim Panel Replacement (w/o TB5) or Body Side Rear Trim Panel Replacement (w/TB5) .
1 Accessory and Liftgate Control Module

Procedure

  1. Disconnect the electrical connectors
  2. Reprogram the accessory and liftgate control module if replaced. Refer to Control Module References

Tip

  1. The liftgate control module is located behind the liftgate close actuator assembly
  2. Push in the tab to release the module from the liftgate actuator bracket
scientia non olet · About Mike's Workshop Manuals