Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2007 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 682 (Battery, Charging System And Starting System - Introduction) >> Repair Instructions >> Battery Tray Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2006 GMC Sierra, 2006 GMC Cab & Chassis Sierra, 2006 Chevrolet Silverado, and 2006 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the battery tray.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices
  2. Install the battery tray bolts (1) to the battery tray support.
    Fig 1: View Of Battery Tray & Bolts At Battery Tray Support
    GM662962Courtesy of GENERAL MOTORS CORP.

    Tighten:  Tighten the bolts to 9 N.m (80 lb in).

  3. Install the battery tray bolts (1) to the fender inner panel.
    Fig 2: View Of Battery Tray & Bolts At Fender Inner Panel
    GM847278Courtesy of GENERAL MOTORS CORP.

    Tighten:  Tighten the bolts to 9 N.m (80 lb in).

  4. Install the battery tray bolts (2) to the battery tray reinforcement.
    Fig 3: View Of Battery Tray Reinforcement & Bolts
    GM847274Courtesy of GENERAL MOTORS CORP.

    Tighten:  Tighten the bolts to 9 N.m (80 lb in).

  5. Install the battery. Refer to Battery Replacement .
scientia non olet · About Mike's Workshop Manuals