Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2007 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 671 (Interior Trim) >> Repair Instructions >> Tool Storage Compartment Lock Replacement (PRO) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2006 GMC Sierra and 2006 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    CAUTION: Eye protection must be worn when drilling rivets to reduce the chance of personal injury.
  1. Raise the rear seat.
  2. Remove the rivets retaining the lock assembly to the tool storage compartment.
    Fig 1: Identifying Tool Storage Compartment Lock Rivets (PRO)
    GM787288Courtesy of GENERAL MOTORS CORP.
  3. Remove the lock assembly from the vehicle.

Installation Procedure

  1. Install the lock assembly to the vehicle.
  2. Install the rivets retaining the lock assembly to the tool storage compartment.
    Fig 2: Installing Tool Storage Compartment Lock (PRO)
    GM787288Courtesy of GENERAL MOTORS CORP.
  3. Lower the rear seat.
scientia non olet · About Mike's Workshop Manuals