Installation Procedure
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2012 GMC Yukon XL, 2012 GMC Yukon, 2012 Chevrolet Tahoe, 2012 Chevrolet Suburban, and 2012 Chevrolet Avalanche. However, it is still accessible from the selected car via links, so may be relevant.
- Install the generator battery jumper cable to the vehicle.
- Install the generator battery jumper cable terminal (4) to the mega fuse stud.
- Install the generator battery jumper cable to the mega fuse nut (3).
Tighten
Tighten the mega fuse nut to 9 N.m (80 lb in).
- Install the generator battery jumper cable clip (2) to the A/C evaporator tube.
- Install the generator battery jumper cable clip (1) to the stud.
- Install the mega fuse cover.
- Install the generator battery jumper cable terminal (1) to the generator stud.
- Install the generator battery jumper cable nut (2) to the generator.
Tighten
Tighten the jumper cable nut to 9 N.m (80 lb in).
- Position the generator battery jumper cable boot (3).
- Install the air cleaner outlet duct. Refer to Air Cleaner Resonator Outlet Duct Replacement .
- Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
CAUTION:
Refer to Fastener Caution .