Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2007 >> Escalade EXT >> Repair and Diagnosis >> External Pages >> Different car >> Section 1032 (Lighting Systems) >> Diagnostic Information and Procedures >> DTC B2580 >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Ignition ON, activate the High Beam output control on the scan tool. The High Beam Relay Command parameter in the data list should display On and the high beam headlamps should illuminate.

scientia non olet · About Mike's Workshop Manuals