Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2007 >> Escalade EXT >> Repair and Diagnosis >> Accessories & Equipment >> Warning Systems >> Tire Pressure Monitoring System >> Diagnostic Information and Procedures >> Scan Tool Output Controls

Scan Tool Output Controls

Scan Tool Output Controls

Scan Tool Output Control Additional Menu Selections Description
Tire Pressure Monitor (TPM) Option TPM Option Enable After replacing the Remote Control Door Lock Receiver (RCDLR) assembly, the SPS reprogramming must be used to enable the TPM option, refer to Control Module Setup .
Module Setup Tire Type/Pressure Selection After replacing the RCDLR assembly, the scan tool must be used to select the correct tire type and the front and rear tire pressures for the vehicle being serviced. Refer to Control Module Setup .
Module Setup TPM Learn Mode The sensor learn procedure must be performed after every tire rotation, RCDLR replacement, or sensor replacement. Once the TPM learn mode has been enabled, each of the sensors unique identification (ID) codes can be learned in to the RCDLR's memory. Refer to Tire Pressure Sensor Learn .
scientia non olet · About Mike's Workshop Manuals