Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2007 >> CTS V >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 6.0L - Introduction (2 Of 2) >> Repair Instructions >> Manifold Absolute Pressure Sensor Replacement >> Removal Procedure

Removal Procedure

    Fig 1: MAP Sensor & Grommet
    GM1408858Courtesy of GENERAL MOTORS CORP.
  1. Remove the engine sight shield. Refer to Upper Intake Manifold Sight Shield Replacement .
  2. Disconnect the MAP sensor electrical connector.
  3. Pull the MAP sensor (714) forward in order to release the sensor from the retainer.
  4. Lift the MAP sensor upward.
  5. Remove the MAP sensor seal (715) if necessary.
scientia non olet · About Mike's Workshop Manuals