Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2007 >> CTS V >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 6.0L - Introduction (2 Of 2) >> Repair Instructions >> Manifold Absolute Pressure Sensor Replacement >> Installation Procedure

Installation Procedure

    Fig 1: MAP Sensor & Grommet
    GM1408858Courtesy of GENERAL MOTORS CORP.
    IMPORTANT:
    • Inspect the MAP sensor seal (715) for damage. Replace the seal if necessary.
    • Lightly coat the MAP sensor seal with clean engine oil before installing the sensor.
  1. Install the MAP sensor (714). Push down the sensor in order to engage the retainer.
  2. Connect the MAP sensor harness connector.
  3. Install the engine sight shield. Refer to Upper Intake Manifold Sight Shield Replacement .
scientia non olet · About Mike's Workshop Manuals