Installation Procedure

Fig 1: View Of Radio

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice .

Connect the electrical connectors.
Install the radio assembly to the I/P retainer.
Tighten: Tighten the screws to 9 N.m (80 lb in).
Install the HVAC programer/ashtray assembly. Refer to HVAC Control Module Replacement .
Install the center I/P air vents. Refer to INSTRUMENT PANEL CENTER TRIM PANEL REPLACEMENT .
Reprogram the radio. Refer to Control Module References for programming and setup information.