Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2007 >> CTS Base, 2.8 T, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Theft Deterrent System) >> Repair Instructions >> Theft Deterrent Inclination Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Cadillac STS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Identifying Theft Deterrent Inclination Sensor & Theft Deterrent Alarm
    GM899939Courtesy of GENERAL MOTORS CORP.
  1. Remove the right rear compartment trim. Refer to Rear Compartment Trim Panel Replacement .
  2. Remove the theft deterrent inclination sensor (2) from the theft deterrent alarm (1).
  3. Disconnect the electrical connector from the sensor.
  4. Remove the sensor from the vehicle.
scientia non olet · About Mike's Workshop Manuals