Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2007 >> CTS Base, 2.8 T, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 2.8L - Introduction (2 Of 2) >> Repair Instructions >> Air Cleaner Assembly Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Intake Air Baffle Assembly
    GM1705251Courtesy of GENERAL MOTORS CORP.
  1. If previously removed, install the intake air baffle assembly to the vehicle.
    2. Fig 2: Locating Push Pins
    GM1705250Courtesy of GENERAL MOTORS CORP.
  2. Install the intake air baffle assembly push pins (1).
    3. Fig 3: View Of Air Cleaner
    GM1469647Courtesy of GENERAL MOTORS CORP.
  3. Install the air cleaner.
    4. NOTE: Refer to Fastener Notice .
  4. Install the air cleaner bolts.

    Tighten:  Tighten the air cleaner bolts to 9 N.m (78 lb in).

  5. Connect the MAF electrical connector.
  6. Install the air cleaner intake duct. Refer to Air Cleaner Inlet Duct Replacement .
scientia non olet · About Mike's Workshop Manuals