Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2007 >> CTS Base, 2.8 T, Standard >> Repair and Diagnosis >> Body & Frame >> Seats >> Power Seat System >> Repair Instructions >> Lumbar Switch Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Seat Track Trim Cover & Lumbar Switch Electrical Connector
    GM1310508Courtesy of GENERAL MOTORS CORP.
  1. Install the lumbar switch (2) into the seat track trim cover (1).
  2. Connect the electrical connector.
  3. Install the seat track trim cover to the seat.
scientia non olet · About Mike's Workshop Manuals