Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Cadillac >> 2006 >> XLR Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Seat System) >> Repair Instructions >> Seat Control Module Replacement - Rear No. 2 >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the seat cushion frame. Refer to Seat Cushion Frame Replacement - Rear No. 2 .
    2. Fig 1: View Of Seat Control Module Electrical Connector & Retaining Nuts
    GM1261005Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the electrical connector (1) from the seat control module.
  3. Remove the nuts from the control module (2).
  4. Remove the module.
scientia non olet · About Mike's Workshop Manuals